Specific Control & Display (Durant)

DIN Rail Adapter

For panel-mounting all DIN size counters, timers and process indicators, 0.94” x 1.89” (24 x 48 mm) or 1.97” x 0.98” (50 x 25 mm)

• Cut-out: 0.98” x 1.97” (25 x 50 mm)
• For snap-on fitting to 35 mm top hat DIN rails
• Construction
• • Mounting panel for counter: Chrome-plated sheet steel
  • Top hat DIN rail adapter: Glass fiber reinforced polymide

Vane Pickup Sensor

• 10-15V DC input power
• 35 mA current draw
• 10-foot (3m) shielded cable
• Environmentally sealed
• 3000 Hz maximum speed

C-Face Ring Tachometer

• 5-16V DC input power
• NPN transistor output, 20 mA sinking capacity
• 60 pulses per resolution
• Zero speed pickup
• Variety of motor C-face sizes: 56, 184, 254, 256
• 39 to 225 degrees F (4 to 107 degrees C) operating temperature

Magnetic Pickup Sensor and Gear

Magnetic Pickup

• 0.24” (6.4 mm) diameter
• Ideal for tachometer and rate control applications
• -40 TO 298 degrees F (-40 to 148 degrees C) operating temperature
• Output is AC signal, amplitude proportional to speed of target
• 10-foot (3m) cable attached
• L-Mounting bracket included

30-Tooth Gear Assembly

• 1.6” (41 mm) diameter
• 0.275” (7 mm) bore diameter
• Mounting set screw included

Rotary Contactor

• No power required
• Reed switch output models for electronic counters
• Contact closure output
• Leaf switch output models for electromechanical counters
• 5/16” (7.9 mm) double shaft, 2400 rpm max. at 1:1 ratio
• 12” (304.8 mm) wire leads

Measuring Wheels

• For use with shaft encoders and rotary contactors
• 12” (304.8 mm) meter circumference
• Urethane, rubber and knurled edges available